Real Time Automation 460MSBS Guía de usuario descargar pdf (Pagina 55)

LED Configuration

To modify the behavior of the LEDs on the 460 gateway, navigate to Other->Setup LEDs.

The LED Configuration page lets you configure the LEDs on the gateway.

Each LED may be set to Disabled, Protocol 1, or Protocol 2. If either Protocol is a Master/Client, you may

set the LED to represent either all Slaves/Servers configured in our gateway or a particular Slave/Server

device.

To select a particular Slave/Server device:

a) Select the protocol in the left dropdown menu.

b) Click Save Parameters to generate the second dropdown menu.

c) Select the individual Slave/Server in the right dropdown menu.

Click the Save Parameters button to commit the changes and reboot the gateway.

LED 1 is the LED closest to the Ethernet port on the gateway device.

Real Time Automation, Inc. 55 1-800-249-1612

1 2 ... 50 51 52 53 54 55 56 57 58

Sin comentarios

Real Time Automation 460MSBS Guía de usuario Pagina 55