Real Time Automation 460MSBS Guía de usuario descargar pdf (Pagina 25)

Mapping - Transferring Data between Devices

There are 5 ways to move data from one protocol to the other. You can combine any of the following

options to customize your gateway as needed.

Option 1 – Data Auto-Map: The gateway will automatically take the data type (excluding strings) from

one protocol and look for the same data type defined in the other protocol. If there isn’t a matching

data type, the gateway will map the data to the largest available data type. See Data Auto-Map section

for more details.

Option 2 – String Auto-Map: The gateway will automatically take the string data type from one protocol

and map it into the other. See String Auto-Map section for more details.

Option 3 – Manual Map: If you don’t want to use the Auto-Map function, you must use the manual

mapping feature to configure translations.

Option 4 – Manipulation/Scaling: You can customize your data by using math operations, scaling, or bit

manipulation. See Data Mapping-Explanation section for more details.

Option 5 – Move Diagnostic Information: You can manually move diagnostic information from the

gateway to either protocol. Diagnostic Information is not mapped in Auto-Map mode. See Diagnostic

Info section for more details.

Real Time Automation, Inc. 25 1-800-249-1612

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Sin comentarios

Real Time Automation 460MSBS Guía de usuario Pagina 25